负载型廉价金属催化剂在低温催化氧化甲醛中的应用

甲醛是室内常见的挥发性有机污染物之一,长期接触会严重危害人体健康。负载型廉价金属催化剂在甲醛去除和实际应用方面表现出优异性能,引起研究人员的广泛关注。本文阐述了低温条件下负载型廉价金属催化剂在甲醛热催化氧化、光催化氧化和等离子协同催化氧化方面的研究进展,介绍了甲醛低温催化的影响因素,并讨论了反应机理。反应条件、载体类型和制备方式是影响甲醛低温催化活性的重要因素。虽然负载型廉价金属催化剂在甲醛光催化氧化和热催化氧化方面均表现出良好性能,但仍须进一步探究提升其在可见光和室温下的催化活性。对于甲醛等离子协同催化氧化,降低反应过程所产生的副产物和能耗仍是研究重点。此外,本文还对负载型廉价金属催化剂在甲醛催化应用中的发展方向进行了展望。     

碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

基于红外隐身及多波段兼容隐身材料

随着探测系统的快速发展和探测精度的提高,隐身技术的需求日益迫切。由于传统的红外隐身材料面临着多途径目标探测的严峻挑战,因此开发既能满足红外隐身要求又能满足雷达隐身、可见光隐身、激光隐身要求的新型兼容隐身材料具有重要意义。红外隐身材料主要针对目标的红外辐射特征进行材料、结构设计,降低目标在背景中热红外辐射信号的突出性以及被热红外制导武器命中的概率。本综述概述了红外隐身及兼容材料的工作原理、制备方法及最新研究进展。首先介绍了最具有发展前景的红外隐身材料包括光子晶体、掺杂半导体、相变材料和纳米材料的结构特性、隐身机理和研究成果,重点关注了实现红外隐身的材料以及具体的隐身特性,讨论了红外兼容雷达、红外兼容可见光、红外兼容激光以及多波段兼容等材料的兼容隐身条件,并对其最新研究进展进行了系统的总结。最后,梳理了目前红外隐身材料以及各兼容材料所存在的不足及面临的困难,并对未来的研究方向进行了展望。     

Thermal Stability of Amorphous Solid Dispersions

Amorphous solid dispersion drug delivery systems (ASD DDS) were proved to be efficient for the enhancement of solubility and bioavailability of poorly water-soluble drugs. One of the major keys for successful preparation of ASD is the selection of appropriate excipients, mostly polymers, which have a crucial role in improving drug solubility and its physical stability. Even though, excipients should be chemically inert, there is some evidence that polymers can affect the thermal stability of active pharmaceutical ingredients (API). The thermal stability of a drug is closely related to the shelf-life of pharmaceutical products and therefore it is a matter of high pharmaceutical relevance. An overview of thermal stability of amorphous solids is provided in this paper. Evaluation of thermal stability of amorphous solid dispersion is perceived from the physicochemical perspective, from a kinetic (motions) and thermodynamic (energy) point of view, focusing on activation energy and fragility, as well all other relevant parameters for ASD design, with a glance on computational kinetic analysis of solid-state decomposition.     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

Prandtl Number in Classical Hard-Sphere and One-Component Plasma Fluids

The Prandtl number is evaluated for the three-dimensional hard-sphere and one-component plasma fluids, from the dilute weakly coupled regime up to a dense strongly coupled regime near the fluid-solid phase transition. In both cases, numerical values of order unity are obtained. The Prandtl number increases on approaching the freezing point, where it reaches a quasi-universal value for simple dielectric fluids of about ≃1.7. Relations to two-dimensional fluids are briefly discussed.     

Adding Value in Production of Multifunctional Polylactide (PLA)–ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.     

1，1''-二羟基-5，5''-联四唑的镧系金属配合物的合成、表征及热行为

以1,1′-二羟基-5,5′-联四唑(H_2BTO)为配体,镧系金属离子作为金属中心,采用溶剂热法制备了5种金属配合物:[La_2(BTO)_3(H_2O)_8]·2H_2O (1)、[Ce_2(BTO)_3(H_2O)_8]·2H_2O (2)、[Pr_2(BTO)_3(H_2O)_8]·2H_2O (3)、[Sm_2(BTO)_3(H_2O)_8]·2H_2O (4)和[Nd_2(BTO)_3(DMF)_4]·6H_2O (5)。通过单晶X射线衍射和元素分析对5种配合物的结构进行了表征。结果表明,5种配合物均属于单斜晶系,P2_1/n空间群。利用差示扫描量热法研究了配合物1～4的热稳定性,采用Kissinger法和Ozawa法分别计算了其热分解动力学参数。     

Al2O3/PDMS复合材料热传导的分子动力学模拟

采用分子动力学模拟方法研究了Al₂O₃/聚甲基二硅氧烷(PDMS)复合材料在300 K时的传热行为, 通过分析热传导、温度梯度以及导热增强等理论数据, 讨论了不同半径以及不同浓度的Al₂O₃填料粒子对PDMS传热的影响. 结果表明随着体积分数的增大, Al₂O₃/PDMS复合材料的热传导先减小后增加. 并且当Al₂O₃填充粒子的半径为5 nm时, Al₂O₃/PDMS复合材料的热传导达到最大值. 通过考察传热过程中的Al₂O₃填料和Al₂O₃/PDMS复合材料的温度和结构变化, 添加有小半径Al₂O₃填料的Al₂O₃/PDMS复合材料在传热的过程中主要以声子的形式进行传热, 此时决定热导率的主要因素有热容c、声子的平均速度v和声子的平均自由程l. 同时, 当体积分数为15%时, 传导链形成, 热量可以顺利通过Al₂O₃填料形成的传导链传播, 有助于热传导的增加.     

小分子给体/高分子受体型有机太阳能电池研究进展

有机太阳能电池具有低成本、柔性和质量轻等优势, 是一种有应用前景的光伏技术, 受到人们的广泛关注. 有机太阳能电池的光敏活性层通常由p-型有机半导体(包括小分子和高分子)与n-型有机半导体(包括小分子和高分子)共混而成. 小分子给体/高分子受体型有机太阳能电池具有形貌热稳定性优异的特点, 值得深入研究. 本综述旨在总结小分子给体/高分子受体型有机太阳能电池的研究进展, 分别介绍了基于酰亚胺基、氰基和含硼氮配位键(B←N)的高分子受体的活性层材料体系的发展状况. 在器件性能方面, 通过分子设计、相分离形貌调控, 改善了小分子给体/高分子受体的匹配性, 将该类电池的能量转换效率从最初的0.29%提升至目前的9.51%, 为性能的进一步提升总结了经验; 在稳定性方面, 基于该体系形貌热稳定性优异的特点, 开发出高温耐受型有机太阳能电池器件. 最后, 展望了小分子给体/高分子受体型有机太阳能电池的未来发展方向和前景.